Administrateur

  • Profile picture of picasso
  • Profile picture of Axel Roebel

AudioSculpt

Groupe Public active 12 hours et 20 minutes ago

User Group for AudioSculpt, AudioSculpt Lite and Analysis/Synthesis Command-line Tool users.

Parameter Text File Being Rejected

Auteur 2 Utilisateurs souscrits |
Profile photo of phonoscopiste
phonoscopiste

I hope that Audiosculpt will eventually have an GUI for producing sound transformations over time.

In the mean time, I am using Audiosculpt v.3.3.8 which calls for me to make and upload a parameter text file.

I have made the file following the Audiosculpt manual carefully, with columns showing respectively:

time | tab character | sound 1 amplitude scaling | sound 1 frequency scaling | sound 2 amplitude scaling | sound 2 frequency scaling | Q-factor

I have tried this using a comma to show decimal point (à la française) and as a full stop point (à l’anglaise) – neither file is accepted when checked by Audiosculpt. I get the error message:

“Check the syntax of line: 2”

Is my use of the tab character between ‘Time’ and ‘Sound 1 amplitude scaling’, correct? There looks to be a tab there in the manual, given column alignments.

Why is Audiosculpt not accepting my parameter file?

Here is the text of the file:

0 0 1 1 0 0.5
0.5 0.37 9.62 9.62 0.37 0.5
1 0.74 9.25 9.25 0.74 0.5
1.5 1.11 8.88 8.88 1.11 0.5
2 1.48 8.51 8.51 1.48 0.5
2.5 1.85 8.14 8.14 1.85 0.5
3 2.22 9.12 9.12 2.22 0.5
3.5 2.59 9.49 9.49 2.59 0.5
4 2.96 8.23 8.23 2.96 0.5
4.5 3.33 8.60 8.60 3.33 0.5
5 3.7 8.97 8.97 3.7 0.5
5.5 4.07 9.86 9.86 4.07 0.5
6 4.44 9.123 9.123 4.44 0.5
6.5 4.81 8.134 8.134 4.81 0.5
7 5.18 8.171 8.171 5.18 0.5
7.5 5.55 8.208 8.208 5.55 0.5
8 5.92 9.160 9.160 5.92 0.5
8.5 6.29 9.197 9.197 6.29 0.5
9 6.66 8.245 8.245 6.66 0.5
9.5 7.03 8.282 8.282 7.03 0.5
10 7.4 8.319 8.319 7.4 0.5
10.5 7.77 9.234 9.234 7.77 0.5
11 8.14 9.271 9.271 8.14 0.5
11.5 8.51 8.356 8.356 8.51 0.5
12 8.88 8.393 8.393 8.88 0.5
12.5 9.25 8.430 8.430 9.25 0.5
13 9.62 9.308 9.308 9.62 0.5
13.68 1.00 0.00 0.00 1.00 0.5

Septembre 9, 2018 à 16:22 #27720
Profile photo of nadir B.
nadir B.

Hi Phonoscopiste,

The parameters file appears to be correct for Cross synthesis in cross mode This is the message thrown by AS 3.4.5 when Check Parameter file was called. I used the extension .par for the file

May be you need to upgrade.
May be it failed because of the decimals. Besides, when you take a closer look at the Generalized cross synthesis GUI, the parameters of sound1 and sound2 do not exceed 1 and they are as follow :

time X x Y y Q

sound1 amplitude scaling | sound2 amplitude scaling | sound1 frequency scaling | | sound2 frequency scaling | Q-factor

So you need to tweak your file’s parameters again

p.s. AS has already a GUI for producing sound transformations over time for most of the treatments. (but you must be talking about the cross synth…)

Attachments:
  1. Screen-Shot-2018-09-09-at-18.53.51

    Screen-Shot-2018-09-09-at-18.53.51.png

  2. Screen-Shot-2018-09-09-at-18.53.51

    Screen-Shot-2018-09-09-at-18.53.51.png

  3. Screen-Shot-2018-09-09-at-18.48.19

    Screen-Shot-2018-09-09-at-18.48.19.png

  4. Screen-Shot-2018-09-09-at-18.48.19

    Screen-Shot-2018-09-09-at-18.48.19.png

Septembre 9, 2018 à 18:15 #27721
Profile photo of phonoscopiste
phonoscopiste

Thanks Nadir B. I’ll try this.

Septembre 27, 2018 à 18:44 #27909

Vous devez être connecté pour répondre à ce sujet.

Log in now